EN
7
ROUTINE USE
CAUTION
• The bottle should not require more than 4 - 6 pumps to work effectively.
If you need to pump more to induce water flow, always do so with the
nozzle open to gauge whether you need to re-pump the bottle. If the
bottle requires more pumping than expected, the bottle may need to
be cleaned (see page 10 for how to clean the bottle). Alternatively the
cartridge may be reaching the end of its service life (see page 19 for Fail
Safe Technology).
• Do not pump if water is not flowing from the bottle; this will over pressurise
the bottle, which will result in the product becoming over stressed. To
release pressure from the bottle unscrew the pump base slowly by ¼ turn
until you hear a hiss sound. Hold on to the pump base and bottle firmly
whilst unscrewing.
• Keep the membranes of the cartridge hydrated by storing at least 1
inch/2.5 cm of water in the bottle at all times whilst keeping the bottle
sealed with the pump, nozzle and snap fit lid in place. Failure to do so will
cause the membranes to dry out, the nano-filter pores to close and the
system to shut down. This is not covered under your warranty and you will
need to purchase another cartridge (see page 16 for storage instructions).
• Do not operate the pump whilst the bottle is empty.
