1
2
3
4
11
insTaLL iPhone
1. Remove any screen protectors and clean iPhone with included cloth
2. Insert iPhone into case front, bottom first, aligning headphone port with
headphone jack cover
3. Snap on case back
4. Close charge port door and make sure jack cover is screwed all the way in
Note: Program Touch ID per manufacturer instructions before installing case.
insTaLLaTion de L’iPhone
1. Retirez le protecteur d’écran, le cas échéant, et nettoyez l’iPhone avec le linge fourni
2. Insérez l’iPhone par le bas dans la partie avant de l’étui, en alignant la prise pour
écouteurs avec le couvercle correspondant
3. Emboîtez la partie arrière de l’étui
4. Fermez la porte du port de charge et vérifiez que le couvercle de la prise pour
écouteurs est vissé à fond
Remarque : Programmez la fonction Touch ID conformément aux instructions du
fabricant avant d’installer l’étui.
INSTALLING THE CASE
1.
Thoroughly clean iPhone
2.
Check seals are clean and in-place
on the rear case
3.
Insert the iPhone into the front of
the case aligning the rear
4.
Top latch and bottom latch totally closed.
Easy way to do is to put the front flat on a table
and very firmly press all around the case,
on the top and bottom.
5.
Make sure your charge port door is closed
and your headphone plug is screwed in securely
INSTALLING THE CASE
1.
Thoroughly clean iPhone
2.
Check seals are clean and in-place
on the rear case
3.
Insert the iPhone into the front of
the case aligning the rear
4.
Top latch and bottom latch totally closed.
Easy way to do is to put the front flat on a table
and very firmly press all around the case,
on the top and bottom.
5.
Make sure your charge port door is closed
and your headphone plug is screwed in securely
INSTALLING THE CASE
1.
Thoroughly clean iPhone
2.
Check seals are clean and in-place
on the rear case
3.
Insert the iPhone into the front of
the case aligning the rear
4.
Top latch and bottom latch totally closed.
Easy way to do is to put the front flat on a table
and very firmly press all around the case,
on the top and bottom.
5.
Make sure your charge port door is closed
and your headphone plug is screwed in securely
1
2
WATER TEST
4.
Submerge underwater,
weighing it down with a coffee cup
for an hour.
4.
After an hour, bring it out of the water
and check that it’s dry inside.
3.
Make sure your charge port door is closed
and your headphone plug is screwed in securely
2.
Align the front and rear cases (no phone)
1.
Check seals are clean and in-place
on the rear case
3. Make sure the Top latch and bottom latch are
totally closed. The Easiest way to do is to put
the front flat on a table and very firmly press
all around the case, on the top and bottom.
30
1
2