5
check seaLs
Make sure O-ring and seal are in place and free of dust, dirt, hair and debris
If dirty: remove, rinse in warm water, shake off, reinstall
vÉrificaTion des JoinTs
Assurez-vous que le joint d’étanchéité et le joint torique sont bien en place et libres de
poussière, de saleté, de poils et de débris
S’ils sont sales, rincez-les à l’eau tiède et secouez-les pour enlever l’eau, puis
réinstallez-les
O-ring
seal
INSTALLING THE CASE
1.
Thoroughly clean iPhone
2.
Check seals are clean and in-place
on the rear case
3.
Insert the iPhone into the front of
the case aligning the rear
4.
Top latch and bottom latch totally closed.
Easy way to do is to put back flat on a table
and very firmly press all around the case,
on the top and bottom.
5.
Make sure your charge port door is closed
and your headphone plug is screwed in securely