ATTACH THE PEDALS
1. Align the left pedal
(F)
with the
screw holes in the left pedal
arm
(H)
.
2. Insert two bolts
(A)
through
the top of the pedal and
through the pedal arm.
3. Put a washer
(B)
onto the end
of each bolt.
4. Screw a nylon lock nut
(C)
onto
the end of each bolt.
5. Use the wrench
(E)
to tighten
the two nuts, securing the
pedal to the FlexStride. Make
the nuts as tight as you can.
6. Remove the adhesive backing
from two foam pads
(D)
and
firmly press one to each bolt
head.
7. Align the right pedal
(G)
with
the screw holes in the right
pedal arm
(I)
.
8. Repeat steps 2–6 to secure the
right pedal.
8
FlexStride User Manual Lifepro
Re Fitness Collection
9
INSERT THE BATTERY INTO THE MONITOR
1. Remove the monitor by carefully pulling it out from the top edge.
2. Insert one AAA battery into the battery receptacle. Ensure it is oriented
correctly.
3. Carefully tuck the wires back in as you re-insert the monitor. Insert from the
bottom first, then press in the top of the monitor.
ASSEMBLY NOTES
• Assemble the FlexStride on a
flat, sturdy floor, covered by
a mat or cloth to protect your
carpet or flooring.
• Ensure the space is free of
obstructions.
F
G
H
C
C
B
B
B
B
A
A
D
D
C
C
I
A
B
C
D
E
M8 Bolts (x4)
D8 Flat Washers (x4)
M8 Nylon Lock Nuts (x4)
Foam Pads (x4)
Wrench (x1)
HARDWARE
