background image

IF HAVE STRANGE SMELL

If the ice has a strange taste.If the ice has a disgusting or mildewy odor in the machine, 
use the above steps to clean the inside of the machine.

SOUND DURING MACHINE OPERATION

The new ice maker may make unfamiliar sounds. Most sounds are normal. 
For example:

* Efficient compressors emit beating or sharp sounds.

* Water splashes from the evaporator to the tank.

* At the end of each cycle, you can hear the gurgling of refrigerant flow.

* The sound of air compressed by the condenser fan over the condenser.

* In the final deicing cycle, you may hear ice falling into the box.

The 
transparency 
of the ice 
cube is not 
very good or 
ice cube 
shape is 
irregular

Improper adjustment of ice 
thickness

Reset ice thickness 

Water quality is bad 

Ice maker water tank or the 
ice tray is very dirty

Clean the ice maker and 
replace the filter

Uneven water flow above 
the ice tray

The shunt tube needs to be 
cleaned or the unit is not level.

Too much water above the 
ice tray

Tie the water pump silicone 
tube

Ice cube is too thin or too 
thick

Adjust ice thickness

The ice maker is not stable 
and the soles of the feet 
are floating

Locate the ice maker on 
a stable surface

The ice maker touches
other objects 

Avoid touching other objects

The door is not 
completely closed

Close the door completely

Working in high 
temperature and high 
humidity environment

Normal

Can't take off 
ice

Excessive 
noise

Condensation 
on the shell

[email protected]

[email protected]

- 29 -

Install a filter on the water
inlet pipe.

Summary of Contents for DBJ-45



































Reviews: