12
Step 6
Slide two Steel Heel Holder Brackets (7) and two Rubber Heel Holders (31) onto both ends
of the Rear Rod (9) until the lock teeth are wedged into the slots in the Rear Rod (9), as
shown in detailed drawing.
Use the same procedure to attach the other two Steel Heel Holder Brackets (7) and two
Rubber Heel Holders (31) onto the Front Rod (11).
Step 7
Pull out the Large Spring Knob (18), and slide the Adjustable Boom (3) into the square
bracket on the bottom of the Bed Frame (4) as shown. Slide the Adjustable Boom (3)
upward until the desired height on the Height Scale (44) is just below the bracket on the bed
frame. Lock the Adjustable Boom (3) in place by releasing the Large Spring Knob (18) and
sliding the Adjustable Boom (3) up or down slightly until the Large Spring Knob (18) "pops"
down into the locked position. For added safety, secured the Knob (30) into the back side
of the bracket on the Bed Frame (4) as shown.
10
178
11
180
12
183
185
13
14
188
190
15
16
193
17
195
18
198
19
200
20
203
21
205
22
208
23
210
203
24
205
25
4
3
30
18
44
9
7
7
31
31
11
31
3
7
31
7
NOTE: Make sure the lock teeth
are wedged into the slots in the
Rear and Front Rods (11, 9) to
lock the Steel Heel Holder
Brackets (7) and Rubber Heel
Holders (31) in place as shown
in figures A and B before use.
