10
(48) Bolt
4 PCS
(51) Bolt
4 PCS
(54) Washer
8 PCS
bolts with the Multi Hex Tool with Phillips Screwdriver provided.
Hardware:
-------------------------------------------------------------------------------------------
Step 3
Install two Nut Caps (55) onto Lock Nuts (15). Slide one Protective Cover (37) on to each
side of the base as shown, and pull down on the Protective Covers (37) until the bottom of
the covers are slightly lower than the Folding Arms (8). Use the Velcro straps on the
bottom of the Protective Covers (37) to secure the covers to the Folding Arms (8). When
the covers are assembled correctly, the Folding Arms (8) should be fully covered by the
Protective Covers (37) with the logo on the side.
37
2
1
55
15
55
8
8
(55) Nut Cap
2 PCS
