7
ASSEMBLY INSTRUCTIONS
1. Rear Main Frame and Front/Rear Stabilizers Installation
Remove six M8x15 Hexagon Socket Pan Head Bolts (15) and six Ø8xØ16x1.5 Washers (45)
from the Rear Main Frame (46). Remove bolts with the 5mm Allen Wrench provided.
Connect the Extension Hand Pulse Sensor Wires I (69) from the Rear Main Frame (46) to
the Extension Hand Pulse Sensor Wires II (67) from the Front Main Frame (17).
Insert the Rear Main Frame (46) into the Front Main Frame (17) and secure using six M8x15
Hexagon Socket Pan Head Bolts (15) and six Ø8xØ16x1.5 Washers (45) that were removed.
Tighten bolts with the 5mm Allen Wrench provided.
Position the Front Stabilizer (3) in front of the Front Main Frame (17) and align bolt holes.
Attach the Front Stabilizer (3) onto the front curve of the Front Main Frame (17) with two
M8x70 Bolts (5), two Ø8xØ25x2 Big Curve Washers (16), and two M8 Cap Nuts (18).
Tighten cap nuts with the Multi Hex Tool with Phillips Screwdriver provided.
Position the Rear Stabilizer (48) behind the Rear Main Frame (46) and align bolt holes.
Attach the Rear Stabilizer (48) onto the rear curve of the Rear Main Frame (46) with two
M8x70 Bolts (5), two Ø8xØ25x2 Big Curve Washers (16), and two M8 Cap Nuts (18).
Tighten cap nuts with the Multi Hex Tool with Phillips Screwdriver provided.
Hardware:
Allen Wrench 5mm
Tools:
Multi Hex Tool with Phillips Screwdriver
S8, S13, S14, S15
(5) Bolt M8x70
4 PCS
(16) Big Curve Washer
Ø8xØ25x2
4 PCS
(18) Cap Nut M8
4 PCS
Summary of Contents for 26460
Page 7: ...6 OVERVIEW DRAWING...
