2
2
24
Once your manikin is connected to
your patient simulator, you will be
able to pick up the ECG waves either
through the monitor hook-ups on
the skin or through the two disks
attached to the skin on the defibrilla-
tion sites.
These disks will enable you to pick
up the ECG wave using either the
“Quick Look” paddle option or directly
through gel pads, just like on a real
patient.
It is possible to use AED gel pads
with the cable connectors built into
the gel — the same ones you use on
patients. In an effort to help you save
money, Nasco does offer a set of defi-
brillation pad and patient simulator
adapters that will correspond to your
particular AED unit. These defibrilla-
tion pad and patient simulator adapt-
ers can be reused again and again.
They come as a set. (See “Supplies/
Replacement Parts” at right.)
Troubleshooting:
Problem:
ECG wave is not being picked up
from the manikin.
Solution:
1. Check your connections on the
patient simulators, one or more
may be disconnected.
2. Check to make sure your patient
simulator is plugged in and working
properly.
Problem:
ECG wave is inverted.
Solution:
Recheck the position of the red and
black lead snaps on the patient
simulator.
NOTE:
If the defibrillation skin is not
functioning or wiring comes undone,
please contact us to repair or replace
the unit. Failure to do so, or unauthor-
ized repair may void the warranty or
cause further harm or damage to you
or your equipment.
Supplies/Replacement Parts for
Defibrillation Chest Skin:
LF03656U
Physio Control
Defibrillation
Pad and Patient
Simulator Adapter
Package
LF03657U
Marquette Electronics
Defibrillation Pad and
Patient Simulator
Adapter Package
LF03658U
SpaceLabs, First
Medic, or Laerdal
Defibrillation Pad and
Patient Simulator
Adapter Package
LF03691U
Zoll Training Cables
with Adapters
LF03962U
Physio Control
Training Cables with
Adapters
NOTE:
If you need help selecting the
training pad adapters that correspond
to your AED unit, please feel free to
call us at 1-800-558-9595 for assis-
tance.
Procedure A
