9
AGECH
RED CABLE
BLACK CABLE
BLACK -
RED +
BLACK -
RED +
V0
V2
1
V4
2
M
O
C
O
N
C
N
RX
V0
V2
1
V4
2
TX
6
12
16
17
'64&"
16
17
18
19
20
OUTPUT
24
V
ac 200 mA max
OUTPUT
30
V
dc 200 mA max
7
TROUBLESHOOTING
This chapter describes the most frequently encountered problems with the solutions for resolving them. In certain cases, it is explicitly envisaged
that operations be performed by a professional fitter: these indications must be followed in order to avoid exposure to serious risks.
7.1
Malfunctions indicated on the control unit
SIGNAL
MALFUNCTION
ACTION
POSSIBLE SOLUTION
N.B.
Obstacle detection sensitivity regulation is
described in the ADJUSTMENTS CHAP.
The check intervenes inverting motion, i.e.
performing an opening, and when it reaches
the end of the stroke, it awaits a new signal
(even in condominium mode); however, if the
system is opening, it intervenes inverting the
motion for a short stretch (3/4 cm) and then
stopping until such time as new commands
are given.
Obstacle
N.B.
In this situation release the automation and
call for technical assistance.
The control intervenes by passing the system
to the operation condition with dead man command
and reduced speeds.
This class includes
various incorrect and
unsafe operation
situations
N.B. if the problems persist it is absolutely necessary to call the assistance service.
CAUTION:
To work with photocells CONNECT IN
DC POWER
8
BUFFER BATTERIES (OPTIONAL)
a) The
RG1RE 24DL
SUPRA control unit can be fitted with a pair of 2Ah 12V buffer batteries (AGE 12) (optional), which allows emergency operation
in the event
of a power failure.
b) T
he batteries must be installed and replaced at the end of their service life by a PROFESSIONAL INSTALLER and not by the end user,
as there are live parts close by.
c) The control unit is designed to house an AGECH battery charger, which automatically charges the connected pair of batterie
s.
Battery function is indicated on the control unit by the alternate flashing of the green LEDs:
:
