2.
Unplug and remove headphone jack cable and USB cable from rear cover.
Non-Treadmill console shown
Item
Description
Qty
1
Front cover
1
2
Main board
1
3
Headphone jack cable
1
4
USB connector cable
1
5
Rear cover
1
Remove LCD Board
1.
Remove left and right ribbon cables by pulling down on board cable connectors.
Item
Description
Qty
1
Ground terminal
1
2
Left ribbon cable
1
3
Right ribbon cable
1
2.
Remove ground wire from ground terminal by wiggling connector back and forth using needle nose pliers.
3.
Remove eight screws securing LCD board to front cover using a Phillips screwdriver. If a console has spacers
between the front cover and the Message Center board, reuse the spacers when installing the new Message
Center board.
Item
Description
Qty
1
Front cover
1
2
LCD board
1
3
Screw
8
Page 40 of 153