Life Fitness Integrity SL Service Manual Download Page 118

Page: 118 / 156

Error 95

Error Message Displayed to user

•

E95

•

Motor Controller Error

•

Notify Maintenance Max Temperature Trip

•

Warning - Step off Belt

•

Notify Maintenance, Maximum Voltage Trip

•

Notify Maintenance, Motor Thermal Trip

•

Low Voltage Detected

•

Notify Maintenance, Overload Trip

Condition

Error occurs during power up or during a workout.

Cause

Determine what individual error condition produced this error by reviewing System Error Logs in Diagnostics, and
then verify with the appropriate error in the first Column.

Remedy

See other error codes

•

Error 33

Notify Maintenance! Motor Controller Error, (Thermal Shutdown)

•

Error 34

Notify Maintenance! Motor Controller Error (Hardware Current Trip)

•

Error 38

Warning - Step Off Belt, Maximum Voltage Trip

Page 116 of 153

Summary of Contents for Integrity SL





























































































































































Search results

Summary of Contents for Integrity SL

Reviews:

Brands by name

Popular brands

Life Fitness Integrity SL, Service Manual

Search results

Summary of Contents for Integrity SL

Reviews:

Brands by name

Popular brands