STEP 7:
12
•
LOOSELY
assemble the LAT/LOW BOOM (11) to the LAT/LOW FRAME (14) and the TOWER UPRIGHT (9) using seven RH
CAPS (69), two 3/8 X 73mm BOLTS (57), two 3/8 X 90mm BOLTS (58), seven 3/8” SAE WASHERS (66), seven 3/8” RH WASHERS
(67) and three 3/8” LOW HEIGHT LOCK NUTS (65) as shown in FIGURE 7.
STEP 8:
FIGURE 8
•
SECURELY
assemble the three SHROUD BRACKETS (15) to the LAT/LOW BOOM (11) using six RH CAPS (69), six 3/8 X 90mm
BOLTS (58), twelve 3/8” SAE WASHERS (66), six 3/8” RH WASHERS (67) and six 3/8” LOW HEIGHT LOCK NUTS (65) as shown
in FIGURE 8.
(NOTE: Use RH WASHERS and RH CAPS on top only.)
TIGHTEN!
3/8 X 90mm 58
39
15
69
66
67
65
11
•
Slide the 13/16” SHAFT COLLARS (39) up against the SHROUD BRACKETS (15) and
SECURELY
tighten the set screws on
the SHAFT COLLARS (39). See FIGURE 8.
FIGURE 7
14
57 3/8 X 73mm
3/8 X 90mm 58
9
67
65
66
69
11
