STEP 18:
FIGURE 18
19
• Route the ROW CABLE (72) around one 4-1/2” PULLEY (26) and assemble the PULLEY to the bottom holes of the DUAL
PULLEY PLATES (23) using two RH CAPS (69), one 3/8 X 43mm BOLT (51), two 3/8” SAE WASHERS (66), two 3/8” RH WASHERS (67)
and one 3/8” LOW HEIGHT LOCK NUT (65) as shown in FIGURE 18.
26
14
72
69
67
66
23
65
51 3/8 X 43mm
30
• Screw the threaded end of the ROW CABLE (72) all the way onto the end of the 3/4 X 3-1/8” TAPPED SHAFT (30) and tighten
jam nut securely. See FIGURE 18.
41
• Insert one 5-1/2” PIVOT SHAFT (41) into the LAT/LOW ROW FRAME (14) as shown in FIGURE 18.
0
1
1/2
1/2
1/2
1/2
1/2
1/2
2
3
4
5
6
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
