Press the
key to enter editing mode. It is identified by the
symbol and the blinking
of the digits to be modified.
The
key shows the next option.
The
key shows the previous option.
Press
to validate the data; the
symbol disappears from the display.
Press the
key to access the next programming step.
If no keys are pressed for 5 minutes, the unit switches to the simulation screen,
“5�27�-
SIMULATION SCREEN”
.
Table 41: Phase connection options�
Phases
V measurement phase CT connection phase
PH1
L1-L2-L3
L1
PH2
L1-L2-L3
L2
PH3
L1-L2-L3
L3
PH4
L1-L2-L3
L1 (inverted transformer)
PH5
L1-L2-L3
L2 (inverted transformer)
PH6
L1-L2-L3
L3 (inverted transformer)
Connection type
3u3C
If the connection with three currents has been
selected (
3u3C
), each current is associated with its
voltage and the direction of the current is indicated
in this screen.
d
: direct.
i
: reverse.
Press the
key to enter editing mode. It is identified by the
symbol and the blinking
of the digits to be modified.
The
key shows the next option.
The
key shows the previous option.
The
key skips to the previous voltage.
The
key skips to the next voltage.
79
Instruction Manual
Controller MASTER control VAR FAST
