LIFAN Power USA
2205 Industrial Park Road
Van Buren, AR 72956
866-‐471-‐7464
www.lifanpowerusa.com
12
Controls and Features
(continued)
Legend
1.
Fuel Level Sensor
– Displays Current Fuel Level
2.
Fuel Tank Cap
– Vented Fuel Cap Must be Properly Installed at all times during
Operation
3.
Receptacle Panel
– See Product Specifications for Individual Model
4.
Double Pole Circuit Breaker (AC)
– Protects Receptacles & Generator from
Overload
5.
Pilot Light
– Amber/Green Light to Indicate Generator is Producing Power
6.
Crankcase Oil Dipstick/Oil Fill Hole Cap
– Check/Fill Engine Oil
7.
On/Off Switch
– Rocker Style; Set to “ON” to start Engine & “OFF” to Shut Off
Engine; Key Switch Model: Turn to “START” to Crank Engine & “OFF” to Shut Off
Engine
8.
Crankcase Oil Drain Plug
– Remove to Drain Oil from Crankcase
9.
Recoil Starting Handle
– Pull Handle to Rotate Engine for Starting.
10.
Fuel Cock (Valve)
– Turn to “OFF” to Terminate Fuel Delivery to Engine
11.
Air Cleaner
– Check Maintenance Schedule for Service Intervals
12.
Choke
–
5000 Watts & 8000 Watts Model
: Before starting cold generator, pull the choke
pin outward from generator to activate the choke lever. After allowing
generator to run for a few seconds, push pin inward toward generator.
3500 Watts & 4000 Watts Model
: Before starting cold generator, rotate the
choke lever to the left until resistance is felt. After starting the generator, rotate
the choke lever to the right to disengage.
13.
Earth Grounding Stud
– Always connect generator to an Earth Grounding
Source. Consult Local Energy Jurisdiction for Code Requirements in your area.
14.
Muffler & Muffler Hood
– Exhaust muffler emits combustion gas from engine
and lowers the noise level of the generator
15.
Valve Cover
– Cover for Overhead Valves designed to be removed periodically
for valve adjustments.