background image

Chapter 7 – Limited warranty

UPStation GXT 3x1

Page 24

(06/02)

7.1

 

Limited Warranty

LIMITED WARRANTY

Liebert Corporation extends the following LIMITED WARRANTY to
the purchaser and to its customer (collectively referred to as the
"Purchaser"): the enclosed Uninterruptible Power System (UPS) and
components are free from defects in materials and workmanship
under normal use, service, and maintenance FOR A PERIOD OF
TWO YEARS FROM THE DATE OF ORIGINAL PURCHASE from
Liebert or the Liebert dealer or retailer. THE FOREGOING
WARRANTY IS THE ONLY WARRANTY GIVEN AND NO OTHER
WARANTY IS PROVIDED, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. Certain aspects of disclaimers are not
applicable to consumer products acquired by individuals and used for
personal, family, or household purposes (as distinguished from
industrial or other purposes). Local laws may not allow limitations on
how long an implied warranty lasts, so the above limitation may not
apply to you. This warranty gives you specific legal rights, and you
may have other rights which vary according to local law.
Certain repairs or services are the responsibility of the Purchaser and
the Purchaser is expected to pay for them. This warranty does not
extend either to products with removed or altered serial numbers or to
any losses or damages due to act of God or source external to the
product, misuse, accident, abuse, neglect, negligence, unauthorised
modification, alteration, or repair, use beyond rated capacity, or
improper installation, maintenance, application or use, including,
without limitation, use in a manner contrary to the accompanying
instructions or applicable codes.  WARNING: Warranty is void if the
battery is allowed to discharge below the minimum battery cut-off
point. The battery must be recharged every four (4) to six (6) months
when not in use.
If the UPS fails to conform with the above warranty within the two
year warranty period, Liebert will repair or replace the UPS, at
Liebert's option. Repairs or replacements are warranted for the
remainder of the original warranty period. Purchaser, to make a
warranty claim, should call to obtain a Returned Goods Authorisation
number and shipping instructions. Return transportation costs to
Liebert are the responsibility of the Purchaser.

"LIFE SUPPORT" APPLICATIONS

Due to the diversity of applications and considerations to be applied
in each case, Liebert does not recommend or knowingly sells its
products for such use.

The responsibility for risk assessment and management in
applications where the malfunction or failure of the UPS could be
reasonably expected to give rise to a risk of human life shall be the
sole responsibility of the purchaser. Liebert accepts no liability for
consequential harm in such applications.

Summary of Contents for UPSTATION GXT3X1-10000

































Reviews: