Liebert IntelliSlot Installation Manual Download Page 65

Page: 65 / 80

Building Management Functions (IS-IPBML & IS-IPBMS Cards Only)

10.4 BACnet/IP Server Menu

Once BACnet/IP is activated (as described in

Section 10.2

the Management Protocol menu displays BACnet/IP as enabled

and provides access to the BACnet/IP Configuration menu.
The BACnet/IP Server menu allows you to specify BACnet/IP

protocol settings for the Web card.

Terminal Emulation (Serial or TCP/IP Connection) / Telnet

To access the BACnet/IP Server Menu:
1. Choose

IP Network Settings

from the Main Menu.

2. Choose

Management Protocol

from the IP Network

Settings Menu.

3. Choose

BACnet/IP Server

4. Choose an option from the BACnet/IP Server menu:

Web Interface

To configure BACnet/IP through the Web interface:

• Click on the

Configure

tab, then

BACnet

in the left panel under

Management Protocol

and

finally

Edit

at right. After making changes, click

Save

Table 27

BACnet/IP Server Menu options

Feature

Description

BACnet Write

Access

Allows the BACnet server to write to the managed device.

Note:

Checking this feature enables or disables write operations by the BACnet interface only.

Write operations may still be available from other system interfaces.

Device Instance

Number

Assign an instance number for this device object

(0-4194303)

Note:

A restart of the system is required before a change to this value will take effect.

Device Object

Name

ASCII string as name of this device (32 characters maximum).

Note:

Setting this value to "-" will reset it to the factory default name.

APDU Timeout

Timeout in milliseconds for APDU

(1-65535 ms)

APDU Retries

Retry times for APDU

(0-8)

Supported Data

List

For detailed instructions, see

10.4.1 - Supported Data List - BACnet/IP

Management Protocol Menu
-------------------------
1: Select Managed Protocol

BACnet/IP

2: BACnet/IP Server

<ESC>: Cancel menu level

Please select a key ?>

BACnet/IP Server Menu
----------------------
1: BACnet Write Access

Enabled

2: Device Instance Number 1130000
3: Device Object Name

Device1130000

4: APDU timeout

3000

5: APDU Retries

6: Supported Data List

Initializing

<ESC>: Cancel menu level

Please select a key ?>

Configure tab

BACnet

Edit, then Save

Write

Access

Summary of Contents for IntelliSlot

















































































Search results

Summary of Contents for IntelliSlot

Reviews:

Related manuals for IntelliSlot

Brands by name

Popular brands

Liebert IntelliSlot, Installation Manual

Search results

Summary of Contents for IntelliSlot

Reviews:

Related manuals for IntelliSlot

Brands by name

Popular brands