LI-COR LI-3100C, Instruction Manual

Page: 29 / 50

Figure 5-4. With prompts enabled, a prompt dialog box appears after the Log Data button
is pressed.
Maximum width, average width, and length are calculated for the area of objects
passed through the meter since the last time values were zeroed. The user may
choose to zero the area counter and calculated values for width and length each time
the Log Data button is pressed by checking the 'Zero values after Record' check box.
Or, values can be manually zeroed by pressing the Reset Counter button under the
software area counter.
The Subtotal column represents an accumulated value of all area values logged to
the data file. The Average Area column shows the average for the last "n" area obser-
vations, selectable by the user in the New Data File dialog box.
Figure 5-5. Grid on main window of the LI-3100C software, populated by data logged to
an open log file.
Section 5. Using the Windows® interface software
5-5 Creating a log file