LGMG AS1932E, Operation And Safety Manual

Page: 23 / 68

LGMG North America Inc.
Operation and Safety Manual
15
Chapter 4 Pre-Operation Inspection
△
!
WARNING
Operation of this machine is forbidden,
unless the following safe operation
principles are understood and practiced.
⚫
When operating this machine, all
dangerous conditions must be avoided
at all times.
⚫
The pre-operation inspection must
always be performed prior to operation
.
△
!
Notice
Ensure the workstation inspection is
fully understood before proceeding to
the next step.
⚫
The workstation is inspected and
checked.
⚫
The function test is always made prior
to operation.
⚫
The machine is used for its designed
purpose.
4.1 Basic Principles
1) The pre-operation inspection and routine
maintenance are the responsibilities of the
operator.
2) The pre-operation inspection is a visual
process, which shall be performed daily by
the operator before each work shift. The
purpose of the inspection is to check the
machine for any significant problems before
performing the Function Test.
3) The pre-operation inspection can also be
used for confirming if routine maintenance is
required. The operator shall only perform
routine maintenance as specified in this
manual.
4) Check the list in the next page and check
every item.
5) If any damage is found or any un-permitted
change different to the delivery status is
found, tag the controls and stop operation of
the machine.
6) Only qualified maintenance technicians are
permitted to repair the machine as per LGMG
North America. After the required
maintenance has been performed, the
operator must carry out the pre-operation
inspection again before the function test.
4.2 Pre-Operation Inspection
1) Ensure the manual is complete and legible.
Keep it in the manual box on the platform.
2) Keep all labels clear and readable and place
them appropriately. Go through the label.
3) Check for any hydraulic oil leakage and