LGMG AS1932E, Operation And Safety Manual, Page: 38 / 68

LGMG North America Inc.
Operation and Safety Manual
30
7.16 Error Codes
△
! Notice
When an error code is present, the code will flash once per second on the screens of
the ECU and PCU.
Table 11 - Error Codes
Display Description Response
01 System initialization error Stop all actions
02 System communication error Stop all actions
03 No machine code is set during the first use Stop all actions
04 The set code is invalid Stop all actions
06 Prompt of successful release of the remote parameter Display alarm only
07 Secondary lock alarm Disable lifting and running
08 Prompt of successful release of weight calibration data Display alarm only
12 Chassis lifting or lowering button opening error during start Stop all chassis controls
18 Pothole protection error Stop lifting and running
31 Pressure sensor error Stop all actions
32 Angle sensor error Stop all actions
33 1412 light load mode data calibration error Disable lifting with handle
35 Calibration data error Display alarm only
36 Low battery alarm
38 Activated overload function and uncompleted weight calibration error Disable lifting with handle
39 The battery level switch detects the low level of the battery. Display alarm only
40 Alarm of failed ECU and GPS handshake Running but no lifting
41 Lock vehicle status through platform (only applicable to the ECU with
the GPS function) Running but no lifting
42 Platform left turn button pressing error during start Display alarm only
43 Platform right turn button pressing error during start Display alarm only
46 Platform handle enable switch button pressing error during start Stop platform control
47
“The platform handle is not in the middle position” error during start
The speed is reduced to the speed
after lifting