LGMG AS1930, Operation And Safety Manual

Page: 43 / 109

LGMG North America Inc.
Operation and Safety Manual
35
7.16 Error Codes
△
!
Notice
When an error code is present, the code will flash once per second on the screens of
the ECU and PCU
.
Table 10 - Error Codes
Display Description Response
01 System initialization error
Stop all actions
02
System communication error
Stop all actions
03 No machine code is set during the first use Stop all actions
04
The set code is invalid
Stop all actions
06
Prompt of successful release of the remote parameter
Display alarm only
07
Secondary lock alarm
Disable lifting and running
08 Prompt of successful release of weight calibration data Display alarm only
09 Incorrect feature configuration settings Disallow all actions
12 Chassis lifting or lowering button opening error during start Stop all chassis controls
18 Pothole protection error Stop lifting and running
27 Proportional solenoid valve failure Stop lifting and running
31 Pressure sensor error Stop lifting and running
32
Angle sensor error
Stop lifting and running
33 1412 light load mode data calibration error No lifting
35
Calibration data error
Display alarm only
36
Low battery alarm
Speed reduced to walking
speed after lifting
38 Activated overload function and uncompleted weight calibration error No lifting
39 The battery level switch detects the low level of the battery. Display alarm only
40 Alarm of failed ECU and GPS handshake No lifting or walking
41
Lock vehicle status through platform (only applicable to the ECU with
the GPS function)
No lifting
42 Platform left turn button pressing error during start Display alarm only
43 Platform right turn button pressing error during start Display alarm only
46 Platform handle enable switch button pressing error during start Stop platform control