LGMG AS1930, Operation And Safety Manual

Page: 26 / 109

LGMG North America Inc.
Operation and Safety Manual
18
Chapter 4 Pre-Operation Inspection
△
!
Warning
Operation of this machine is forbidden,
unless the safe operation principles of
the machine are understood and
practiced.
⚫
All dangerous conditions are avoided.
⚫
The pre-operation inspection is always
performed.
△
!
Notice
Ensure the workstation inspection is
fully understood before proceeding to
the next step.
⚫
The workstation is inspected and checked.
⚫
The function test is always made before
operation.
⚫
The machine is used for its designed
purpose.
4.1 Basic Principles
1) The pre-operation inspection and routine
maintenance are the responsibilities of the
operator.
2) The pre-operation inspection is a visual
process, which shall be performed daily by
the operator before each work shift. The
purpose of the inspection is to check the
machine for any significant problems before
performing the Function Test.
3) The pre-operation inspection can also be
used for confirming if routine maintenance is
required. The operator shall only perform
routine maintenance as specified in this
manual.
4) Check the list in the next page and check
every item.
5) If any damage is found or any un-permitted
change different to the delivery status is
found, tag the controls and stop operation of
the machine.
6) Only qualified maintenance technicians are
permitted to repair the machine as per
LGMG North America. After the required
maintenance has been performed, the
operator must carry out the pre-operation
inspection again before the function test.
4.2 Pre-Operation Inspection
1) Ensure the manual is complete and legible.
Keep it in the manual box on the platform.
2) Keep all labels clear and readable and place
them appropriately. Go through the label.
3) Check for any hydraulic oil leakage and