Operation Manual of Elevating Work Platform
33
7.16 Error Codes
△
!
Notice
When an error code is present, the code will flash once per second on the screens of
the ECU and PCU.
Table 10 - Error Codes
Display
Description
Response
01
System initialization error
Stop all actions
02
System communication error
Stop all actions
03
No machine code is set during the first use
Stop all actions
04
The set code is invalid
Stop all actions
06
Prompt of successful release of the remote parameter
Display alarm only
07
Secondary lock alarm
Disable lifting and running
08
Prompt of successful release of weight calibration data
Display alarm only
09
Incorrect feature configuration settings
Disallow all actions
12
Chassis lifting or lowering button opening error during start
Stop all chassis controls
18
Pothole protection error
Stop lifting and running
27
Proportional solenoid valve failure
Stop lifting and running
31
Pressure sensor error
Stop lifting and running
32
Angle sensor error
Stop lifting and running
33
1412 light load mode data calibration error
No lifting
35
Calibration data error
Display alarm only
36
Low battery alarm
Speed reduced to walking
speed after lifting
38
Activated overload function and uncompleted weight calibration error
No lifting
39
The battery level switch detects the low level of the battery.
Display alarm only
40
Alarm of failed ECU and GPS handshake
No lifting or walking
41
Lock vehicle status through platform (only applicable to the ECU with
the GPS function)
No lifting
42
Platform left turn button pressing error during start
Display alarm only
43
Platform right turn button pressing error during start
Display alarm only
46
Platform handle enable switch button pressing error during start
Stop platform control
