LGMG AS0607 Operation Manual Download Page 28

Page: 28 / 54

Operation Manual of Elevating Work Platform

AS0607E

AS0607W

1.23

AS0607WE

AS0612

1.25

AS0612E

AS0608

1.9

AS0608E

AS0808

AS0808E

AS1012

AS1012E

AS1212

AS1212E

AS0812

2.29

AS0812E

SS0607E

2.43

AS1413

2.52

AS1413E

2) Press one side of the pothole guard and then

other side. Result: The pothole guard will not

move.

3) Lower the platform. Result: The pothole

guard will be returned to the stowed position.

4) Place blocks under the pothole guards

(3.5cm×20cm) wood block or a similar

material) and elevate the platform. Result:

When the platform elevates a given height

(as shown in the following table), the alarm

will sound. The drive function will be

disabled.

Table 8 – Pothole Guard Not Deployed Alarm Height

Model

Height (m)

SS0407E

SS0507E

AS0612

1.45

AS0612E

AS0607

1.5

AS0607E

AS0607W

1.58

AS0607WE

AS0608

2.1

AS0608E

AS0808

AS0808E

AS1012

AS1012E

AS1212

AS1212E

SS0607E

2.6

AS0812

AS0812E

AS1413

2.78

AS1413E

5) Lower the platform and remove the blocks.

Summary of Contents for AS0607























































Search results

Summary of Contents for AS0607

Reviews:

Related manuals for AS0607

Brands by name

Popular brands

LGMG AS0607, Operation Manual

Search results

Summary of Contents for AS0607

Reviews:

Related manuals for AS0607

Brands by name

Popular brands