Operation Manual of Elevating Work Platform
7
manufacturer’s service rules for
personal protection equipment, the
service rules for the workstation,
and the laws and regulations made
by the local government.
Observe and follow the traveling
arrow and the turning direction
arrows on the platform controller
and the platform’s label and
nameplate.
Do not operate the machine on the
line of any crane or movable
overhead machine, unless the crane
controller is locked and/or the
potential bump prevention measure
is taken.
Dangerous driving or careless
operation when running the machine
are strictly prohibited.
The platform can be lowered only
when there are no personnel or
barriers below the platform.
Limit travel speed according to
ground conditions, traffic, road
grade, personnel position, or any
other possible bump factors.
△
!
Component Damage Hazards
Do not charge the batteries with
anything more than a 24V battery
charger.
Do not use the machine as a ground
for welding. This could cause
damage to the electrical components
on the machine.
△
!
Explosion and Fire Hazards
Do not operate or charge the
machine in a location with a
potential for inflammable or
explosive gas or particles.
△
!
Machine Damage Hazards
Do not use a damaged or
malfunctioning machine.
Make a complete operational and
function check before each shift.
Attach a tag on a damaged or
malfunctioning machine immediately
and stop all operation.
Be sure to perform all maintenance
and operation according to the
instructions in this manual.
Be sure to keep all labels and decals
at the appropriate locations. Replace
any that are not legible.
Be sure to keep this manual in the
manual box of the platform.
△
!
Personal Injury Hazards
Do not operate the machine if it is
leaking hydraulic oil. Leaking
hydraulic oil under pressure can
