LGL Electronics SPIN1, Instruction Manual

Page: 4 / 60

WARNINGS
4
1) Switch off the power supply box and the yarn accumulator before
starting any part connection, maintenance or replacement.
2) During standard machine operation, the yarn accumulator may
suddenly start up without prior warning.
CAUTION: the orange lights do not signal that the yarn accumulator
is ON, but that the accumulator has gone into an alarm mode.
Therefore, during standard operation they should be OFF.
3) Before yarn accumulator start-up, inspect it physically for
damage (moving parts).
4) Strictly avoid touching any moving part during accumulator
operation
5) Due to the high accuracy and sensitivity of the tension sensor,
mobile or cordless phones might interfere with it. Operation of
the device and the sensor is not affected. In any case, to avoid
interference, we recommend that you keep a minimum distance
of 3 metres.
6) Only use the original L.G.L. Electronics spare parts and
accessories.
7) Any repairs to the accumulator’s electronic parts must be
performed by appropriately qualified personnel, regularly
authorised by L.G.L. Electronics accordingly.
8) Yarn accumulators that are moved from warehouse storage into
a warmer weaving mill environment may develop condensation;
please wait until they are completely dry before connecting them
up. Failure to do so may damage the electronic components.