15
EN
NOTE
• Installation in a confine
d
space without
proper ventilation will lea
d
to higher power
consumption.
• Auxiliar
y
drain pan
MUST b
e installe
d
in
complian
c
e with local codes.
Drain pan kits are available from the store
where the water heater purchased, or any
water heater distributor.
Drain pan shoul
d
not obstruct cold water inlet
or drain valve.
- Select space where has enough space for
periodi
c
servicing. The air filter, covers, and
front panels can
b
e remove
d
to permit
inspection an
d
servicing.
-
T
ake the weight of the water heater into
account an
d
select a place where the floor is
strong enough to support the weight of full
water heater.
- The water heater an
d
water lines shoul
d
be
protecte
d
from freezing an
d
high corrosive
elements. Do not install water heater in
outdoor or unprotecte
d
areas.
- Install the water heater close to the area of
the greatest heater water deman
d
an
d
the
center of plumbing system. Long uninsulated
hot water lines can waste energ
y
.
- Insufficient air exchange will result in
increase
d
energ
y
consumption level.
- The installation site must be over 1 °C.
Minimum Clearances
Minimum room size:
20 m
3
0.15 m
0.15 m
0.45 m
0.15 m
0.45 m
0.5 m
Select the best Location
NOTE
• For future service, a minimum 1 m clearance
between any object and the left, right and
back side is recommended.
Ensure the water heater is horizontal using a
spirit level.
Keep level parallel in installing the product.
Otherwise, it may cause vibration or water
leakage. It may cause injury or an accident.
Summary of Contents for WH20S F5
Page 36: ...36 EN ...
