9
EN
• Fee
l
wate
r
before
bathing
o
r
showering.
• Eve
n at 50
°C, ho
t
wate
r can
scald.
• Do not block the inlet or outlet of air flo
w
.
• Never touch, operate, or repair the water heater with wet
hands.
• Do not leave flammable substances such as gasoline, benzene,
or thinner near the water heate
r
. (Do not install the unit in
potentially explosive atmospheres.)
• Cut off the power supply if there is any noise, smell, or smoke
coming from the water heate
r
.
• Make sure that the power cable is neither dirty, loose, nor
broken.
• Do not place any objects on the power cable.
• Do not modify or extend the power cable. Scratches or peeling
insulation on the power cables may result in fire or electric
shock, and should be replaced.
• The supply cord cannot be replaced. If the cord is damaged the
appliance should be scrapped.
• Do not expose people, animals, or plants to the cold wind from
the water heater for extended periods of time.
• Take care to ensure that power cable could not be pulled out or
damaged during operation. There is risk of fire or electric shock.
• Do not touch refrigerant pipe, water pipe and any internal parts
while the unit is operating or immediately after operation. There
is risk of burns or frostbite, personal injury.
• Additional refrigerant injection is not possible.
Maintenance
• If the supply cord is damaged, it must be replaced by the
manufacture
r
, its service agent or similarly qualified persons in
order to avoid a hazard.
Summary of Contents for WH20S F5
Page 36: ...36 EN ...