15
Check before using
※
Be sure to check before use!
Open the Tap water Valve
When the Display's indicator light is turned off
When the product is not used for a Long time (ex. 2~3 days)
After the installation
Periodical change of filter
The product operates when Tap water is supplied.
When the Display's indicator light is turned off, check if power supply is stopped due to
blackout or other causes.
If water has been kept in the tank or has not been used for a long time, then drain the
water completely.
Drain the newly purified water one more time and use the purified water generated
after this process.
Throw away the water when the inside tank is full more than once before use.
It takes around 1 hour for the water to reach full level, but the time differs by water,
pressure, temperature, and filter activating rate.
Filter replacement is very important for clean water.
Take note of the time for filter replacement, since the old filter will not function well.
Notice
If the product is not used for a long time, unplug the power cord and close the
Tap water valve.