10
Safety precautions
Installation
CAUTION
As an indoor product, install in a
place away from direct sunlight
and protected from snow and rain.
- Product failure may occur.
Do not tilt the product by more
than 30 degrees when moving.
- Product failure may occur.
Do not connect hot water to the
product.
- Product failure may occur.
Make sure you use a new hose
and parts for installation.
- If you use used parts, water might leak,
and such will cause electric shock or
property damage.
After the installation, make sure
that the connection of the hose
and that of the water purifier are
both open (if not, open them).
- If bolts loosen and water leaks, such
may cause electric shock or property
damage.
There should be more than 10
cm
gap between each side of the
product and the wall for smooth
pipe connection.
- It can cause water leak.
30
º
10
cm