LG V-NET ACS PREMTA000 Installation & User Manual Download Page 14 | Manualshive

Page: 14 / 115

background image

OPERATION SETTING - Advanced Mode

27

26

OPERATION SETTING - Advanced Mode

ENGLISH

●

If you press On/Off button during the use, product operation will stop.

●

Press the temperature control button to adjust the desired Indoor temperature.

- Indoor temperature is displayed on the remote controller default screen.(As below the pic-

ture)

- Depending on the indoor unit type, the desired temperature can be controlled in increments

1°C or 0.5°C(2°F or 1°F)

h

If the desired temperature is set higher thermal cooling does not turn on and only the fan will
operate.

NOTE

!

• Setting temperature range :

Option 1. 64~86 °F (18~30 °C) (default setting)
Option 2. 64~99 °F (18~37.5 °C)
Option 3. 50~99 °F (10~37.5 °C) (if connecting to indoor unit with 2set point function)

• The difference between the indoor temperature and the outdoor temperature is recom-

mended to be 5 °C.

What is a 3 minute delay function?

If the indoor unit is operated right after stopping the cooling, no thermal cooling is allowed.
This function protects the compressor from malfunctioning. Compressor starts 3 minutes
after and the fan starts.

●

Press remote controller screen 1 time to turn on.
- If remote controller operation is not used, screen will go into energy savings mode.

●

During the cooling operation, if you press fan speed ‘

▲

’ button, power cooling is performed

after fan speed ‘HIGH’.

h

For some indoor units products, according to whether there is a wind amount function,
power cooling is performed after fan speed ‘POWER’.

●

During the cooling operation, if you press fan speed ‘

▼

’ button, power cooling is performed

after fan speed ‘AUTO’.

h

For some indoor units products, according to whether there is a fan speed function, power
cooling is performed after fan speed ‘LOW’ or ‘SLOW’.

●

If you operate the fan speed control button during the usage, power cooling is turned off and
fan speed and set temperature returns to the setting before the power cooling.

h

Some products do not have the power cooling function.

What is power cooling?

• Desired temperature: 18°C (64°F)

• Fan Speed: ‘POWER’

• Fan direction: fixed to cooling operation position

These operations quickly decrease
the indoor temperature.

Power Cooling

It performs a strong cooling in a short period of time.

«
...
12
13
14
15
16
...
»

Summary of Contents for V-NET ACS PREMTA000




















































































































Reviews:

No comments

Related manuals for V-NET ACS PREMTA000

imageRUNNER ADVANCE C9075S PRO

Brand: Canon Pages: 20

Brand: K&K Pages: 6

Brand: E-fly Pages: 16

Brand: Panasonic Pages: 45

Max Charge MC-624

Brand: Balmar Pages: 8

MAX CHARGE MC-614

Brand: Balmar Pages: 20

Brand: KaRo Pages: 12

Brand: u-blox Pages: 28

Brand: Osram Pages: 3

Brand: Riello Pages: 72

Brand: Blue Point Engineering Pages: 12

Brand: Oriental motor Pages: 52

Brand: Opt Pages: 40

Brand: TechNexion Pages: 80

Brand: Parker Pages: 24

Brand: Hach Pages: 504

ECOFRIDGE DISPLAY

Brand: HULTSTEINS Pages: 16

Brand: Teracom Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands