LG STB-3000 Page 40 Setup Manual Download

Page: 40 / 86

206-4272

Custom Master STB Setup

This section describes how to create a customized Master STB Setup for cloning purposes when

the STB is in Pass-through Mode. The Master STB Setup can used to configure either STBs that

are to remain in Pass-through Mode or STBs that are to be configured for FTG Mode.
Cloning requirements and procedures are described in detail on pages 43 to 48.

Note:

You can use the FTG File Manager to create an FTG Configuration (.tlx) file for FTG Mode

configuration, if desired (see pages 49 to 50). However, it is not possible to customize STB setup

menu settings in the FTG File Manager. If you wish to include customized STB setup menu settings

in the STB configuration, in addition to the channel lineup and Installer Menu settings, perform the

Master STB Setup procedure to create the configuration file.

Before You Begin

• It is recommended that you disconnect all Aux inputs if you intend to run Auto Tuning (Channel

Search). Under certain conditions, Auto Tuning is disabled if there is an Aux input active.

• All Learning and Teaching processes on the STB are performed via USB memory device / TLX

file. The TLX file comprises Installer Menu settings, IP Environment Menu settings (with the

exception of unique STB attributes and settings), and all STB sources’ (analog, digital, AV1,

HDMI, etc.) clonable setup menu settings. See also “Clonable STB Setup Menu Features” list

below.

•

If the TLX file contains an FTG Channel Map (created during Master STB Setup or in the FTG

File Manager), the Target STB(s) will be configured for FTG Mode after Teaching is performed,

though as part of the Teaching process, you may have the option to select either logical or physical

channel tuning. If you would like the Target STB(s) to remain in Pass-through Mode, the TLX file

should not include an FTG Channel Map.

Clonable STB Setup Menu Features

Quick Settings

Channels

General

Language

Time & Date

−

Clock Mode (Auto/Manual)

−

Time Zone

Timers (No Signal Power Off)

Accessibility

Pointer Options

Closed Captions

Note:

Some menu options vary between analog and digital channels and Aux inputs.

Summary of Contents for STB-3000























































































Search results

Summary of Contents for STB-3000

Reviews:

Related manuals for STB-3000

Brands by name

Popular brands

LG STB-3000, Setup Manual

Search results

Summary of Contents for STB-3000

Reviews:

Related manuals for STB-3000

Brands by name

Popular brands