LG SRFVC2416S Owner'S Manual Download Page 39

Page: 39 / 68

SMART FUNCTIONS

ENGLISH

unplug the appliance and wait about a minute

before trying again.

• If the firewall on your wireless router is enabled,

disable the firewall or add an exception to it.

• The wireless network name (SSID) should be a

combination of English letters and numbers. (Do

not use special characters.)

• Smartphone user interface (UI) may vary

depending on the mobile operating system (OS)

and the manufacturer.

• If the security protocol of the router is set to

WEP

, network setup may fail. Change the

security protocol (

WPA2

is recommended), and

Installing the LG ThinQ Application

Search for the

LG ThinQ

application from the

Google Play Store or Apple App Store on a

smartphone. Follow instructions to download and

install the application.

Connecting to Wi-Fi

The

Wi-Fi

button, when used with the

LG ThinQ

application, allows the appliance to connect to a

home Wi-Fi network. The Wi-Fi indicator shows the

status of the appliance’s network connection. The

Wi-Fi indicator illuminates when the appliance is

connected to the Wi-Fi network.
•

Initial Appliance Registration

Run the

LG ThinQ

application and follow the

instructions in the application to register the

appliance.

•

Re-registering the Appliance or Registering

Another User

Press and hold the

Wi-Fi

button for 3 seconds to

temporarily turn it off. Run the

LG ThinQ

application and follow the instructions in the

application to register the appliance.

NOTE

• To disable the Wi-Fi function, press and hold the

Wi-Fi

button for 3 seconds. The Wi-Fi indicator

will be turned off.

Wireless LAN Module Specifications

FCC Notice

The following notice covers the transmitter

module contained in this product.
This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference to

radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to

try to correct the interference by one or more of

the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment

and the receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two

conditions:
(1) This device may not cause harmful interference

and
(2) This device must accept any interference

received, including interference that may cause

undesired operation.
Any changes or modifications in construction of

this device which are not expressly approved by

the party responsible for compliance could void

the user’s authority to operate the equipment.

FCC RF Radiation Exposure

Statement

This equipment complies with FCC radiation

exposure limits set forth for an uncontrolled

environment. This transmitter must not be co-

located or operating in conjunction with any other

antenna or transmitter.

Frequency

Range

2412 - 2462 MHz

Output Power

(Max)

< 30 dBm

Summary of Contents for SRFVC2416S





































































Search results

Summary of Contents for SRFVC2416S

Reviews:

Related manuals for SRFVC2416S

Brands by name

Popular brands

LG SRFVC2416S, Owner'S Manual

Search results

Summary of Contents for SRFVC2416S

Reviews:

Related manuals for SRFVC2416S

Brands by name

Popular brands