LG SRFVC2416S Owner'S Manual Download Page 21

Page: 21 / 68

INSTALLATION

ENGLISH

Tighten the pipe clamp.
• Tighten the clamp screws until the sealing

washer begins to swell.

NOTE

• Do not over tighten the clamp or you may crush

the tubing.

Pipe Clamp

Inlet End

Clamp Screw

Washer

Route the tubing.
• Route the tubing between the cold water

line and the refrigerator. Route the tubing

through a hole drilled in the wall or floor

(behind the refrigerator or adjacent base

cabinet) as close to the wall as possible.

NOTE

• Be sure there is sufficient extra tubing (about 8

ft. coiled into three turns of about 10 in.

diameter) to allow the refrigerator to move out

from the wall after installation.

Connect the tubing to the valve.
• Place the compression nut and ferrule

(sleeve) for copper tubing onto the end of

the tubing and connect it to the shutoff

valve. Make sure the tubing is fully inserted

into the valve. Tighten the compression nut

securely.

Saddle-Type Shutoff Valve

Compression Nut

Packing Nut

Outlet Valve

Ferrule (sleeve)

Flush out the tubing.
• Turn the main water supply on and flush

out the tubing until the water is clear. Shut

the water off at the water valve after about

one quart of water has been flushed

through the tubing.

Connect the tubing to the refrigerator.

NOTE

• Before making the connection to the

refrigerator, be sure that the refrigerator power

cord is not plugged into the wall outlet.

• Remove the flexible plastic cap from the water

valve.

• Place the compression nut and ferrule (sleeve)

onto the end of the tubing as shown.

Summary of Contents for SRFVC2416S





































































Search results

Summary of Contents for SRFVC2416S

Reviews:

Related manuals for SRFVC2416S

Brands by name

Popular brands

LG SRFVC2416S, Owner'S Manual

Search results

Summary of Contents for SRFVC2416S

Reviews:

Related manuals for SRFVC2416S

Brands by name

Popular brands