30
Operation and settings
[Behavior Analysis]-Event Set: [Missing Object Detection]
>
Enable Arithmetic: Behavior Analysis
>
Rule ID: Select rule number.
Note:
Check the [Valid]. It draws two rule lines. The arrow of line means
direction of prohibit crossing, 2 lines direction should be the
same, it will alarm when target object cross 2 lines continuously
within the specified time.
>
Rule Name: Input a rule name.
>
Event Set: Select [Missing Object Detection].
Note:
Please notice the detection area shouldn’t overlap when
[Object Abandon] and [Missing Object Detection] are enable at
same time.
>
Alarm Time: Setup alarm time of object lost in detection area, it
will trigger alarm when over the time.
>
Sensitivity: Adjust sensitivity value. As value increases, more
sensitive.
•
Save: Save all the settings.
•
Next: Go into [Alarm Setup] menu.
[Behavior Analysis]-Event Set: [Loiter]
>
Enable Arithmetic: Behavior Analysis
>
Rule ID: Select rule number.
Note:
Check the [Valid]. It draws one rule lines, the arrow of line means
direction of prohibit crossing.
>
Rule Name: Input a rule name.
>
Event Set: Select [Loiter].
>
Alarm Time: Setup alarm time of object stay in detection area, it
will trigger alarm when over the time.
>
Sensitivity: Adjust sensitivity value. As value increases, more
sensitive.
>
Min Area: Adjust minimum area percentages. When the object’s
motion area is equal or greater than this [Min Area], alarm
function will activated.
•
Save: Save all the settings.
•
Next: Go into [Alarm Setup] menu.
[Behavior Analysis]-Event Set: [Running]
>
Enable Arithmetic: Behavior Analysis
>
Rule ID: Select rule number.
Note:
Check the [Valid]. It draws one rule lines, the arrow of line means
direction of prohibit crossing.
>
Rule Name: Input a rule name.
>
Event Set: Select [Running].
>
Minimum Area: Adjust minimum area percentages. When the
object’s motion area is equal or greater than this [Minimum
Area], alarm function will activated.
>
Sensitivity: Adjust sensitivity value. As value increases, more
sensitive.
•
Save: Save all the settings.
•
Next: Go into [Alarm Setup] menu.
Summary of Contents for RNOE-B501A
Page 47: ......
