PREP
ARA
TION
23
Before Operation (Continued)
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT VIDEO OUT /
PROGRESSIVE SCAN jacks, but are connecting the
recorder to a standard (analog) television, set
Progressive Scan to OFF.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to ON.
Note
Progressive Scan will not be displayed in the setup
menu when the VIDEO OUTPUT switch is set at RGB
position.
Caution
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray. See that “NO DISC” is displayed on the display
window.
2) Press STOP and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting and a picture will once again be
visible on a conventional analog TV or monitor.
AV1 Decoder
We have already described, how to connect a decoder
for pay-TV station on page 16. For viewing or recording
of an encoded program from EURO AV1 AUDIO/VIDEO
connector, you do not have to control anything. You just
select AV1 source by pressing AV button and wait
shortly until the decoding will start.
Choose ‘ON’ if your recorder is connected with a
decoder, otherwise leave it set to ‘OFF ’.
PBC
The PBC setting can be changed. Set Playback Control
(PBC) to ON or OFF.
- ON: Video CDs with PBC are played according to the
PBC.
- OFF: Video CDs with PBC are played the same way
as Audio CDs.
Initialization
You can reset the recorder or initialize the HDD and
Memory Card.
1. Press
v
/
V
to select the desired option then press
ENTER.
The confirm message will appear.
2. Use
b
/
B
to select “OK” or “Cancel” then press
ENTER.
-
Factory Set:
If you need to, you can reset the
recorder to all its factory settings. Some options can
not be reset. (Rating, Password, and Country Code)
-
HDD format:
Initializes the HDD (Hard Disk Drive):
everything recorded on the HDD will be erased.
-
M/C format:
Initializes the M/C (Memory Card):
everything recorded on the Memory Card will be
erased.
Auto Program
Program Edit
Clock set
TV Aspect
Progressive Scan
AV1 Decoder
PBC
Initialization
ON
OFF
Auto Program
Program Edit
Clock set
TV Aspect
Progressive Scan
AV1 Decoder
PBC
Initialization
ON
OFF
Auto Program
Program Edit
Clock set
TV Aspect
Progressive Scan
AV1 Decoder
PBC
Initialization
HDD format
Factory Set
M/C format
Auto Program
Program Edit
Clock set
TV Aspect
Progressive Scan
AV1 Decoder
PBC
Initialization
ON
OFF
