RD6250
15
Basic Functions
Turning the Phone On and Off
Turning the Phone On
1)
Install a charged battery pack or connect the
phone to an external power source such as the
cigarette lighter charger, car kit or AC Adaptor.
2) Hold down the Key
for 2 seconds until the
LCD screen flashes.
N
No
otte
e
As any other communication device, avoid any
unnecessary contact with the antenna while your
phone is turned on.
Turning the Phone Off
1)
Press and hold
until the display turns off.
Making a Call
Every time you make a call, follow these steps :
1) Make sure that the phone is turned on. If not, hold
down
for 2 seconds.
2) Type the phone number and then press
.
• If the phone is locked, type the lock code.
3) To end the call press
.
N
No
otte
e
In no service area,
appears from the
screen. When trying voice call in no service area,
“Call could not be completed. Please try again” is
displayed. It means you are in no service area.
Receiving Calls
1) When the phone rings or vibrate (if the Vibrate
Mode is enabled), press any key (except
) or
depending on the Call settings.
• When you press
once, when a call is
received, the phone stops ringing or vibrating
depending on the mode it is in. Press
twice
to disconnect.
2) To end an answered call press
.
3) If you are not in the condition to receive call,
pressing Soft key 2 will disconnect the call and
send a preset SMS to Caller. The SMS can be
edited using "Edit SMS on Call Reject" function
given under Settings.
RD6250_Eng_OM-final.qxd 1/27/07 9:00 PM Page 15
