LG RD-JT51, Service Manual

Page: 68 / 132

êè
CW delay: sets color wheel delay. (Write down this value before
upgrading the software)
White peak:
sets DMD white peak. In PC mode default value set 10 , in
Video mode is 2. Software automatically sets this value as source found.
DLP Brightness: sets DLP Brightness. Default setting is 32 . Do not
change this value.
DLP Contrast: sets DLP Contrast. Default setting is 32 . Do not change
this value.
Burn-In Hour: sets how many hours to burn-in.
Burn-In: activates the burn-in cycle. The burn-in cycle should be
activated with no signal applied to the system. You can see color
changes (red, green, blue, black, white) on screen running in turn.
System will follow a on-off cycle for 2 hours, with 5-minute on and
15-minute off. After the on-off cycle, the system will stay on for the rest of
the burn-in time set in Burn-In Hour. The system will automatically switch
off at the end of the burn-in hour expires.
II. ADC menu (only available when input source is analog RGB)
ADC Brightness: ADC brightness auto calibration black.
ADC Contrast: ADC contrast auto calibration white.
ADC Offset RGB: value to tell you calibrate result.
ADC Gain RGB: value to tell you calibrate result.
Fac Brightness: sets default brightness value in source PC.
Fac Contrast: sets default contrast value in source PC.