LG Pro:Centric 43UT570H Setup Manual Download Page 97

Page: 97 / 98

206-4341

Document Revision History / Open Source Software Notice

Document Revision History

Open Source Software Notice

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please

visit http://opensource.lge.com. In addition to the source code, all referenced license terms, warranty disclaimers and copyright

notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering

the cost of performing such distribution (such as the cost of media, shipping and handling) upon e-mail request to opensource@

lge.com. This offer is valid for three (3) years from the date on which you purchased the product.

Date

Description

April 2019

Revision A: New document

September 2019

Revision B: UT577H information added

Product documentation is available online at:

www.lg.com/us/business

Summary of Contents for Pro:Centric 43UT570H



































































































Search results

Summary of Contents for Pro:Centric 43UT570H

Reviews:

Related manuals for Pro:Centric 43UT570H

Brands by name

Popular brands

LG Pro:Centric 43UT570H, Setup Manual

Search results

Summary of Contents for Pro:Centric 43UT570H

Reviews:

Related manuals for Pro:Centric 43UT570H

Brands by name

Popular brands