38
206-4342
Installer Menu Items 042 through 116
Item
Function
Value Range
Default Value
Brief Description of Function
042
AUTO INPUTS
0 – 255
0
Determines the Aux inputs for which auto-sensing is enabled. See detailed
descriptions.
046
STRT AUX SRCE
1, 3, 5, 255
255
Sets the starting Aux source (if item 004 STRT CHANNEL is set to 0).
047
AUX STATUS
0 / 1
0
Controls the MPI status channel response for Aux sources. Set to 1 for Aux
source to be reported as its channel number.
053
DIS. CH-TIME
0 / 1
0
Set to 1 to disable the TV’s native Channel-Time display.
069
EN. CH-T COL.
0 / 1
1
Set to 1 to enable custom color for MPI display characters.
070
FOR. CH-TIME
0 – 7
2
Chooses custom foreground color for MPI display characters.
071
BCK. CH-TIME
0 – 7
2
Chooses custom background color for MPI display characters.
073
CH NOT AVBLE
0 / 1
0
If set to 1 and item 028 CH. OVERIDE is set to 0, a “CHANNEL NOT
AVAILABLE” message is displayed if the user attempts to direct tune a channel
that is not included in the channel lineup.
075
REVERT CH
0 / 1
0
If set to 1 and loss of MPI communication occurs, the TV tunes to the
Start Channel.
077
QUICK SHUTOFF
0 – 17
0
Allows the TV to be turned OFF with press and hold of pillow speaker
channel buttons. Set to 0 to disable. Set from 1 to 17 to define hold time.
See detailed descriptions.
078
UPN MSB
0 – 255
255
User programmable number, most significant byte.
079
UPN MSB-1
0 – 255
255
User programmable number, most significant byte - 1.
080
UPN MSB-2
0 – 255
255
User programmable number, most significant byte - 2.
081
UPN LSB
0 – 255
255
User programmable number, least significant byte.
082
CHKSM ERROR
0 / 1
1
Enforces rigid MPI checksum.
083
HANDSHK TIME
0 – 5
5
Determines the MPI timing requirement of an MPI command to follow an MPI
Status Response.
084
PERMANENT BLK
0 / 1
0
Set to 1 to remove the blocking hours setting in the Function Menu for Parental
Control and make the block permanent.
088
EN NOISE MUTE
0 / 1
1
(Analog channels only) If set to 1, audio is muted if no signal is present.
090
KEY LOCK
0 / 1
0
If set to 1, all display panel button functions are locked. IR is still functional.
091
HDMI2 ENABLE
0 – 2
1
Set to 0 to disable HDMI 2. Set to 1 (DTV Mode) or 2 (PC Mode), as
applicable, to enable HDMI 2.
094
SAP MENU EN
0 / 1
1
Set to 1 to enable the SAP feature in the Function Menu.
096
DEF. ASP. RATIO
0 – 4
2
Selects the default aspect ratio. See detailed descriptions.
097
AUDIO OUTPUT
0 – 9
7
Set as required in accordance with external audio equipment connected to the
TV. See detailed descriptions.
098
PRO:CENTRIC
0 / 2
0
Set to 0 to disable the Pro:Centric application. Set to 2 for GEM (Java) Mode.
099
BACK LIGHTING
1 – 202, 255
*
255
Sets the level of the TV picture back lighting. See detailed descriptions.
102
ATSC BAND
0 – 4
4
Selects the RF band used by the ATSC tuner. See detailed descriptions.
103
ATSC TUNE MODE
0 / 1
1
Set to 1 for Physical Channel tuning. Set to 0 for Virtual Channel tuning.
104
START MINOR CH
0 – 255
0
Selects the Minor Start Channel number. Set to 0 for analog (NTSC) channel.
106
ASP RATIO LOCK
0 / 1
0
Set to 0 to use the default aspect ratio each time the TV is turned ON. Set to 1
to retain the aspect ratio set before the TV was turned OFF.
107
BANNER SELECT
0 / 1
1
Selects the type of banner to display during channel change.
116
VIDEO MUTE EN
0 / 1
0
(Analog channels only) If set to 1, video mutes (blank screen) when no
signal is present.
* Values 201, 202 applicable for 32/43LT572M TVs only.
Installer Menu (Cont.)