LG Pro:Centric 24LT572M Setup Manual Download Page 37

Page: 37 / 101

206-4342

Installer Menu (Cont.)

Installer Menu Items 000 through 041

Item

Function

Value Range

Default Value

Brief Description of Function

000

INSTALLER SEQ

0 – 3

Leave default set to 0.

001

POWER MANAGE

0 – 7

Selects the number of hours of inactivity allowed before the TV automatically

turns itself OFF. Set to 0 to disable Power Management.

002

AC ON

0 – 3, 16 – 19

Determines the status of the TV (ON, Instant ON enabled, etc.) when AC power

is applied. See detailed descriptions.

003

BAND/AFC

0 – 3

Selects the RF Tuning Band: 0=Broadcast, 1=Cable, 2=HRC, 3=IRC

004

STRT CHANNEL

0 – 127, 255

255

Channel tuned when the TV is turned ON. (Set to 255 to tune to channel

tuned before the TV was turned OFF.)

005

CHAN LOCK

0 / 1

If set to 1, cannot tune from current channel.

007

STRT VOLUME

0 – 63, 255

255

Volume level when the TV is turned ON. (Set to 255 to use volume level set

before the TV was turned OFF.)

008

MIN VOLUME

0 – 63

Sets the minimum allowable volume setting.

009

MAX VOLUME

0 – 63

Sets the maximum allowable volume setting.

010

MUTE DISABLE

0 / 1

Set to 1 to disable the Mute function.

011

KEY DEFEAT *

0 / 1

If set to 1, joystick button menu navigation functions on the display panel are

not available.

012

IR BANKS EN.

0 / 1

Set to 1 to enable TV to respond to bank discrete IR codes.

013

SCAN MODE

0 / 1

Set to 1 to allow Channel Up/Down key presses to turn ON TV. See

detailed descriptions.

014

STRT CH IN SM

0 / 1

Set to 1 to use the Start Channel for the Channel Map pivot point in Scan Mode.

015

SLEEP TIMER

0 / 1

Set to 1 to enable the Sleep Timer feature.

016

EN. TIMER

0 / 1

Set to 1 to enable On/Off timers.

017

ALARM

0 / 1

Set to 1 to enable the Alarm feature in the Function Menu.

020

FEATURE LEVEL

0 – 1, 16 – 24,

64 – 65

Determines an additional IR code scheme to which the TV will respond.

021

V-CHIP

0 / 1

Set to 1 to enable V-Chip (Parental Control) functions.

022

MAX BLK HRS

0 – 99

Determines the maximum number of Parental Control blocking hours that can

be set in the Function Menu.

023

CAPTION LOCK

0 / 1

Set to 1 to retain the caption setting selected before the TV was turned OFF.

025

FUNCTION PRE.

0 / 1

Set to 1 to allow Channel Preview/Banks Setup Menu access via the CH

PREVIEW key on the Installer Remote.

027

HOSPITAL MODE

0 – 162, 254

254

Set according to the speaker selection, the pillow speaker code/supply voltage,

and the hospital IR code. See detailed instructions.

028

CH. OVERIDE

0 / 1

If set to 0, users can only tune to channels that are included in the PTC

Channel Map. See detailed descriptions.

029

REMAP AUX INPS

0 / 1

Set to 1 to remap the PTC’s direct tune channels for Aux inputs from 13x to 9x.

030

ACK MASK

0 / 1

If set to 1, enables the ACK feature of MPI.

031

POLL RATE

20 – 169

Selects the poll rate for MPI.

032

TIMING PULSE

186 – 227

207

Sets the baud rate for MPI.

035

HDMI1 ENABLE

0 –

Set to 0 to disable HDMI 1. Set to 1 (DTV Mode) or 2 (PC Mode), as

applicable, to enable HDMI 1.

039

REAR AUX EN.

0 / 1

Set to 1 to enable the display panel AV input jack.

041

SIMPLINK EN

0 – 3

Determines the status of the SIMPLINK feature. See detailed descriptions.

* This item is applicable for 24/28LT572M TVs only.

Summary of Contents for Pro:Centric 24LT572M






































































































Search results

Summary of Contents for Pro:Centric 24LT572M

Reviews:

LG Pro:Centric 24LT572M, Setup Manual, Page: 37 / 101

Search results

Summary of Contents for Pro:Centric 24LT572M

Reviews: