24
206-4342
Express Script (Cont.)
(Continued on next page)
(Continued from previous page)
The following procedure describes the remaining steps in the Express Script. You can select the
“Back” button, where available, to chek previous settings, as necessary. Typically, if you do not
modify the default settings, the “Next” button is automatically selected when you proceed forward
within the Express Script. Where appropriate, you can simply press
OK
on the Installer Remote to
proceed to the next step if the default value(s) for the TV parameter(s) in question are applicable
for your installation.
Note: If you choose to exit the Express Script from this point on, any settings made
will not be retained.
1. Select the tuning band.
Use the Up/Down arrow keys on the Installer Remote to select the tuning band field, and then
use the Left/Right arrow keys to select the appropriate tuning band option: Cable Standard
(default), Cable HRC, Cable IRC, or Air. When you have made your selection, use the arrow
keys to select
Next
, and then press
OK
.
Express Script
Step 1. Tuning Band
Cable Standard
PTC: V#.##.### CPU: V##.##.##.## ASIC: D279
Back
Next
OK
Exit
CC
1
►
2
►
3
►
4
►
5
►
6
►
7
►
8
Which tuning band would you like to use?
2. Enable/disable Aux inputs.
If you simply select
Next
and press
OK
in this step, default values will be used, i.e., all Aux
inputs will be enabled. To disable one or more of the TV’s Aux inputs, use the Up/Down arrow
keys on the Installer Remote to select
Enable/Disable Aux Inputs
, and then press
OK
. Aux
input options will be displayed in a pop-up window, and you can use the arrow keys to select
the input(s) to enable or disable. When you are finished, press
OK
on the Installer Remote.
Then, continue with step 3.
Enabled Aux inputs are included in the channel lineup. If an Aux input will not be used, it is
typically advisable to disable it, though you may also simply delete it from the channel lineup
in step 6, if you want to leave it enabled in the Installer Menu.
Express Script
Step 2. Aux Inputs
Enable/Disable Aux Inputs
PTC: V#.##.### CPU: V##.##.##.## ASIC: D279
Back
Next
OK
Exit
CC
1
►
2
►
3
►
4
►
5
►
6
►
7
►
8
Would you like to disable any Aux inputs?