SETTING AND USING METHOD
37
ENGLISH
• Checking the accumulative power (Accum Power)
Accumulative power: Values have been continuously accumulated since the initial power is ap-
plied on the power indicator. When wattage is more than 999 999, it will return to “0”.
- Screen Description
- Press the LEFT/RIGHT (
◀
,
▶
) button to increase/decrease the wattmeter number.
- Press the UP/DOWN (
s
,
t
) button to check the electric energy of all indoor units connected.
- In 1.3 or less version, each indoor unit number increases sequentially according to the set number of units.
- In 1.4 or higher version, it displays the address of the indoor unit set for each indoor unit number.
- If the standby power is set to MANUAL, the last page is displayed as follows.
A C C U M ( P 1 )
A D D R - 0 :
A D D R - 1 :
A D D R - 2 :
0 . 0 k W h
0 . 0 k W h
0 . 0 k W h
0 . 0 k W h
• Checking the accumulative gas consumption (Accumulative Gas)
Instant gas: Values have been accumulated since the initial power is applied at the gas meter.
When the displayed gas usage is more than 999 999, it will return to “0”.
- Screen Description
- Press the LEFT/RIGHT (
◀
,
▶
) button to increase/decrease the wattmeter number.
- Press the UP/DOWN (
s
,
t
) button to check the gas energy of all indoor units connected.
- In 1.3 or less version, each indoor unit number increases sequentially according to the set number of units.
- In 1.4 or higher version, it displays the address of the indoor unit set for each indoor unit number.
h
In the case of gas on, standby gas usage is not displayed separately because there is no
standby gas.
Gas meter No.
Each indoor unit No.
Total accumulative gas usage
at G (1) gas meter
The accumulative gas usage of
each indoor unit
A C C U M ( G 1 )
A D D R - 0 :
A D D R - 1 :
A D D R - 2 :
0 . 0 k L
0 . 0 k L
0 . 0 k L
0 . 0 k L
A C C U M ( P 1 )
S T B P :
0 . 0 k W h
0 . 0 k W h
D O W N
- In 1.4 or higher version, if you press left/right button(
◀
,
▶
), it is displayed as follows in the last page.
In this screen, you can check the accumulated power amount (gas usage amount) of each address
for the entire indoor units.
A C C U M ( A L L )
0 . 0 k W h
0 . 0 k W h
0 . 0 k W h
A D D R - 0 :
A D D R - 1 :
A D D R - 2 :
Wattmeter number
Each indoor unit No.
Total accumulative wattage
at P (1) wattmeter
The accumulative wattage of each
indoor unit
1,MFL67982907,영영 2017. 7. 13. 영영 1:14 Page 37
Summary of Contents for PPWRDB000
Page 25: ...SETTING AND USING METHOD 25 ENGLISH ...
Page 40: ...40 ENGLISH ...
