SETTING AND USING METHOD
23
ENGLISH
• Wattmeter property setting: Based on the wattmeter type setting, it automatically switches to
property setting screen.
- Pulse type: Set power consumption by pulse, set attached location (Indoor/Outdoor unit
classification), set indoor unit address
- CT type: Set CT and device constant value, set attached location (Indoor/Outdoor unit
classification), set indoor unit address
• When setting pulse type
Press the (
▼
) button at the initial setting screen to
enter the wattmeter property setting screen.
When the wattmeter item to set flashes, press the SE-
LECT button to change to detail setting window.
After setting all wattmeters, press the MENU button to save the setting and move to the initial
screen.
It proceeds in the order of Set power consumption by
pulse
’
Set power consumption device
’
Set connected
indoor address.
- Set power consumption by pulse (WHM W/PULSE SE-
LECT)
: Enter the value displayed on the wattmeter as power
consumption per pulse
- Set power consumption device (CONSUME UNIT SELECT)
: Check and set whether the product on which the
wattmeter is installed is a indoor or outdoor unit.
※
If one indoor unit is set to use both outdoor unit
power distribution and indoor unit power distribution,
wattage value is displayed as indoor unit wattage
value by summing outdoor unit power distribution
value and indoor unit power distribution value.
- Set connected indoor address (INDOOR ADDRESS SET)
: Enter the indoor address connected to applicable
wattmeter.
※
After the initial installation, address setting of indoor
unit connected to each port shall not be changed. If it
is changed, previous data cannot be used.
After setting the applicable item, press the SELECT button
to save the setting and to move to the next stage.
C O N N E C T I O N : M A S T E R
S T A N D B Y P : A U T O
W H M 1 : N O T U S E
W H M 2 : N O T U S E
* W H M W / P U L S E S E L E C T *
1 . N O T U S E
2 . 1 W / P U L S E
3 . 2 W / P U L S E
C O N S U M E U N I T S E L E C T
1 . O U T D O O R U N I T
2 . I N D O O R U N I T
C O N N E C T I O N : M A S T E R
S T A N D B Y P : A U T O
W H M 1 : 2 W , O D U , 0 0 - 0 0
W H M 2 : N O T U S E
I N D O O R A D D R E S S S E T
(START)
→
(END)
(00)
→
(00)
C O N N E C T I O N : M A S T E R
S T A N D B Y P : A U T O
W H M 1 : N O T U S E
W H M 2 : N O T U S E
Setting detailed properties (EHP products)
Setting information is reflected to the detail setting
window.
1,MFL67982907,영영 2017. 7. 13. 영영 1:14 Page 23
Summary of Contents for PPWRDB000
Page 25: ...SETTING AND USING METHOD 25 ENGLISH ...
Page 40: ...40 ENGLISH ...
