SETTING AND USING METHOD
29
ENGLISH
• When setting the properties of the pulse-type gas meter (LHM1)
On the initial setting screen, press the (
▼
) button and
the screen will be switched to the wattmeter / gas
meter property setting screen.
When the item of the wattmeter you want to set is
blinking, press the SELECT button, and the screen will
be switched to the detailed setting screen.
Configuration information is reflected in the
detailed setting window.
Set gas consumption per pulse
’
Set the connected in-
door unit address in order.
- Set gas consumption per pulse (LHM L / PULSE SELECT).
: Please enter a value shown in the gas meter as the
gas consumption recognized per pulse.
- Set the connected indoor unit address (INDOOR AD-
DRESS SET).
: Enter the address of the indoor unit connected to the
gas meter.
※
After the initial installation, address setting of indoor
unit connected to each port shall not be changed. If
it is changed, previous data cannot be used.
- Set connected indoor address (INDOOR ADDRESS SET)
: Enter the indoor address connected to applicable
wattmeter.
After setting the item, press the SELECT button to save
the settings, and then move to the next step.
C O N N E C T I O N : M A S T E R
S T A N D B Y P : A U T O
W H M 1 : N O T U S E
L H M 1 : N O T U S E
C O N N E C T I O N : M A S T E R
S T A N D B Y P : A U T O
W H M 1 : N O T U S E
L H M 1 : N O T U S E
* L H M L / P U L S E S E L E C T *
1 . N O T U S E
2 . 1 L / P U L S E
3 . 2 L / P U L S E D O W N
I N D O O R A D D R E S S S E T
(START)
→
(END)
(00)
→
(00)
C O N N E C T I O N : M A S T E R
S T A N D B Y P : A U T O
W H M 1 : N O T U S E
L H M 1 : 1 0 L , O D U , 0 0 - 0 0
After setting every gas meter, press the menu button to save the settings, and then move to the
initial screen.
1,MFL67982907,영영 2017. 7. 13. 영영 1:14 Page 29
Summary of Contents for PPWRDB000
Page 25: ...SETTING AND USING METHOD 25 ENGLISH ...
Page 40: ...40 ENGLISH ...
