29
ENGLISH
Note: Steps 5 to 9 identify all fields that may require modification for the purposes of the Pro:Centric
network. In order to avoid a service interruption, do not modify any of the other fields in the Edit
Connection screen. In particular, do NOT modify the data in the Profile Name and Device fields.
Note: The Feature Port IP address MUST be on a different subnet than the Control Port IP address,
but should be on the same network as the TVs.
Also, while either IPv4 or IPv6 is supported for the Control Port, the Feature Port must be configured
on an IPv4 network.
Note: Do not specify a gateway IP address for the Feature Port.
5
To change the port configuration from Automatic to Manual or vice versa, select/highlight the IPv4
Configuration field and press
. Then, select the appropriate option (
or
) from the
drop-down menu.
6 The next step depends on your selection in the previous step.
•
If you selected
, go to step 9.
•
If you selected
, continue with step 7.
7
If you are configuring static (i.e., manual) settings, select/highlight
at the right of the IP Configuration
field and press
to view the expanded configuration fields.
Summary of Contents for PCS500R Pro:Centric
Page 70: ......
