22
ENGLISH
a) At the
prompt, type
and press
.
TCP/IP configuration is performed in the CentOS Network Manager TUI (text-based user interface). The system
will display the Network Manager menu, for example:
b) Select/highlight
and press
.
c) In the next screen, select/highlight the port you wish to configure and press
.
d) With the Edit Connection screen for the selected port on display:
* Add the appropriate IP address in the format xxx.xxx.xxx.xxx/xx, where the last two digits (after the for-
ward slash) identify the network mask bits for the IP address.
* Add the gateway (if applicable) and DNS IP addresses in the format xxx.xxx.xxx.xxx.
See also notes below.
Note: In order to avoid a service interruption, do not modify any of the other fields in the Edit
Connection screen. In particular, do NOT modify the data in the Profile Name and Device fields.
Note: The Feature Port IP address MUST be on a different subnet than the Control Port IP address,
but should be on the same network as the TVs. Also, while either IPv4 or IPv6 is supported for the
Control Port, the Feature Port must be configured on an IPv4 network.
Note: Do not specify a gateway IP address for the Feature Port.
e) When you are finished with network configuration for the selected port, select/highlight
at the
bottom right of the Edit Connection screen and press
.
f) Repeat steps (c) to (e), as required, to complete configuration for the second port.
g) When you are finished with port configuration, select/highlight
at the bottom right of the port
selection screen and press
to return to the Network Manager menu. To exit the Network Manager and
return to the
prompt, select
and press
.
•
Note
: Review the configuration data for each port carefully before you confirm the settings. Ensure each of the
addresses was entered correctly.
•
Note
: You may also edit the host name from the Network Manager menu, if desired. See “Modify the Server
Host Name” on pages 31 to 32 for further information. Avoid using spaces or special characters, such as
?, -, etc., in the host name.
Summary of Contents for PCS500R Pro:Centric
Page 70: ......
