81
SuperSign Manager
Remote Control of the Player/Display Power
You can remotely power on or off the player and/or display connected to SuperSign Manager.
The following shows the steps to remotely power on the player.
1
Select the player to power on.
2
Click
On
as shown above.
3
The Information window appears and shows the information of the selected player. In the window,
click Open to view the selected player's information.
4
You can change the IP address or MAC address of the selected player.
5
In the window, click OK to power on the selected player.
If you select a group, you can control the power of all players and displays in the group at once.
Note
Attention
● The remote power control may not function depending on your network environment. Contact the network
administrator for further assistance.
● The remote power control will not function if the player and the manager are connected through the
Internet and the IP address of the player is set to private.
