LG MULTI V ARNU05GL4G4, Installation Manual

Page: 5 / 331

Installation Manual 5
Safety Precautions
ENGLISH
- Sharp edges could cause injury. Be especially careful of the case
edges and the fins on the condenser and evaporator.
• For installation, always contact the dealer or an Authorized Service
Center.
- There is risk of fire, electric shock, explosion, or injur y.
• Do not install the product on a defective installation stand.
- It may cause injury , accident, or damage to the product.
• Be sure the installation area does not deteriorate with age.
- If the base collapses, the air conditioner could fall with it, causing
property damage, product failure, and personal injur y.
• Do not turn on the breaker or power under condition that front panel,
cabinet, top cove r , control box cover are removed or opened.
- Otherwise, it may cause fire, electric shock, explosion or deat h.
• Use a vacuum pump or Inert (nitrogen) gas when doing leakage test or
air purge. Do not compress air or Oxygen and Do not use Flammab le
gases. Otherwise, it may cause fire or explosion.
- There is the risk of death, injur y , fire or explosion.
Operation
• Do not let the air conditioner run for a long time when the h umidity is
very high and a door or a window is left open.
- Moisture may condense and wet or damage furniture.
• T ake care to ensure that power cable could not be pulled out or
damaged during operation.
- There is risk of fire or electric shock.
• Do not place anything on the power cable.
- There is risk of fire or electric shock.
• Do not plug or unplug the power supply plug during operation.
- There is risk of fire or electric shock.
• Do not touch(operate) the product with wet hands.
- There is risk of fire or electrical shock.
• Do not place a heater or other appliances near the power cabl e.
- There is risk of fire and electric shock.
• Do not allow water to run into electric parts.
- It may cause There is risk of fire, failure of the product, or electric shock.
• The appliance shall be stored in a well-ventilated area where the room
size corresponds to the room area as specified for operation.(for R32)